Thursday, March 24, 2011

VizMail for DMW

Shot and edited a series with DMW CEO Warren Hunter.  This communication was emailed out to prospective Clients.

Tuesday, January 4, 2011

Thursday, December 30, 2010

Wednesday, December 15, 2010

Skateboard Dolly Build

Well, I know I'm not the first to do this, but I won't be the last.  What follows is my Dad and I building a skateboard dolly.  It came out great.  For around $100 here is what we came up with...

 Poppy's workshop
 1 inch PVC, enough to create a 20 foot run
 16 skateboard wheels from eBay
 5/16" bolts
 cutting the 1/8" aluminum rails
 2 just under 4 foot sections of rail
 cutting the 10 foot PVC into 5 foot sections
 laying out the wheel placement
 drilling the wheel holes

 wheel holes
 rounding the rails to prevent cuts
 drilling the holes for the carriage bolts that will attach it to the deck
attaching wheels to rails

 making sure the two rails are parallel
 getting closer

 finished, bottom view
 finished top view

Thanks Dad!

Once we create a dowel system I will upload some test footage...stay tuned!

UPDATE***  first test.